Seats, steering wheels and airbags: interior mods and the MOT

Swapping the wheel or the seats feels harmless, but the cabin is where the airbags live. What fails, what is fine and what to do instead.

Generate high-quality photorealistic automotive performance

Interior modifications feel low-risk. Nothing you do to the cabin changes how the car looks from the road, and nobody at a meet is going to measure your seat height. But the cabin is also where the car’s safety systems live, and that makes it the area where a well-meant upgrade most often turns into an MOT fail or an awkward conversation with an insurer.

Here is what to know before changing seats, steering wheels or trim on a car you drive on UK roads.

Steering wheels and the airbag problem

A smaller, thicker aftermarket wheel is one of the most satisfying changes you can make. It is also the one most likely to cause trouble, because almost every car built in the last thirty years has a driver’s airbag in the standard wheel.

The MOT inspection manual is clear on this. Testers check that airbags fitted as original equipment are present, and an airbag fitted as original equipment that is obviously missing is a major defect. Swap the factory wheel for one without an airbag and the car will fail.

The warning light matters too. If the supplementary restraint system (SRS) warning lamp shows a fault, that is a fail in its own right. Removing an airbag almost always triggers the light, and tricks to hide it do not fix the underlying problem. They also leave you without an airbag in a crash, which is the part that really matters.

One exception catches people out the other way: a passenger airbag that has been switched off, for example to fit a rear-facing child seat, is not a defect.

If the car came with an airbag in the wheel, the wheel you drive on the road needs one too.

Priya Shah

What you can do instead

  • Retrim the standard wheel. Specialist trimmers can re-cover the rim in leather or Alcantara, add a centre marker and thicken the grip, while keeping the airbag in place.
  • Fit a factory upgrade wheel. Many cars had sportier wheels on higher trim levels, complete with airbags, that bolt straight in.
  • Keep the aftermarket wheel for track days. Some owners run a quick-release boss and swap wheels at the circuit. If you do, refit the standard wheel and airbag properly every time the car goes back on the road.

Seats

Bucket seats transform how a car feels from behind the wheel, and a good fixed-back seat on the right subframe can sit lower and hold you better than almost any factory chair. There are three things to get right.

Mounting

The seat has to be securely fixed to the car, and the driver’s seat must be secure in its runners. The MOT checks this. Use a subframe designed for your car and your seat, bolted to the original mounting points with the correct fixings. Home-made brackets and drilled floors are where problems start.

Side airbags

Many modern seats have side airbags built into the bolsters. Remove the seat and you remove the airbag, which is likely to light the SRS warning lamp and, if the airbag was original equipment, may be treated as missing. Check whether your standard seats have airbags before you buy replacements.

Seat belts

Whatever seat you fit, the car still needs working seat belts that meet the standard it was built to. Harnesses look the part, but on a road car they are usually fitted in addition to the original three-point belts, not instead of them. The original belt also has to reach and latch properly with the new seat in place, which some deep buckets make awkward. Check before you commit.

Gear knobs, pedals and trim

Smaller changes are mostly straightforward, with a few cautions.

  • Gear knobs are rarely an issue, although a heavy weighted knob can make some gearboxes feel notchy.
  • Pedal covers must be secure and not catch on each other. A slipping or loose pedal pad is a real hazard.
  • Floor mats should be fixed with the car’s original clips. A loose mat that slides under the pedals is a common and avoidable cause of trouble.
  • Retrims of door cards, headlinings and pillars are fine, as long as anything covering an airbag deployment area, such as the A-pillars or the headlining near curtain airbags, is done by someone who knows what is behind it.

Interior lighting

Ambient strips and footwell lights are a popular addition. Keep them dim enough not to distract you, wired through a proper fused supply, and out of sight from outside the car. Anything that shines through the windows and could be mistaken for a vehicle light invites attention from the police, especially if it is red or blue.

Stripped interiors

Taking out rear seats, carpets and trim saves weight and suits a track-biased build. It is legal, but the car still has to meet the same standards for seat belts, seats and airbags for the seats that remain. Removing rear seats also changes the seating capacity recorded on the V5C. GOV.UK lists seating capacity among the details you must update with the DVLA, so remember to do it.

Insurance

Interior changes are modifications, and insurers want to know about them. Seats and steering wheels in particular can affect how the car performs in a crash, which is exactly what an insurer is pricing. The Financial Ombudsman Service has seen claims refused because modifications were not disclosed. If in doubt, tell them.

Our interior checklist

  • Keep every airbag that came with the car working, including those in the wheel and the seats.
  • Make sure the SRS warning lamp goes out after start-up.
  • Mount seats on proper subframes using the original mounting points.
  • Keep the original seat belts fitted and working.
  • Use proper fixings for mats and pedal covers.
  • Update the V5C if you change the number of seats.
  • Tell your insurer about everything that is not standard.

Priya Shah

Features & restoration

Priya covers the long projects: restorations, barn finds and the specialists who keep old wheels on the road. Currently rebuilding a Mk2 Escort, slowly.

More from Priya
Next story

Three-piece wheels, one year on

Twelve months, 9,000 miles and one Yorkshire winter on split-rims fitted to a daily-driven E46 coupe. What held up, what didn’t, and what the rebuild cost.

Read it
Generate high-quality photorealistic automotive performance
More in Styling